CLDR Tools‎ > ‎


This tool is used to check the TR35 spec .html files for correctness.  See Cleaning up the spec.


For checking the CLDR spec, no arguments need to be supplied (other than the standard settings in CLDR Tools). 

Input options include:
  • -t filename // can be empty for all LDML files, or 'ucd' for all unicode docs.
  • -v // verbose
The output will be a listing of problems and how to correct them. Sometimes the HTML is not clean. In that case, you'll see lines like:

454 Couldn't pop: ul, /!doctype[0]/html[2]/body[73]/div[88]/ul[240]/li[445]/ul[447]/li[448]/ul[450]/li[451]
9474 Couldn't pop: div, /!doctype[0]/html[2]/body[73]/div[88]/ul[240]/li[445]
9476 Couldn't pop: body, /!doctype[0]/html[2]/body[73]/div[88]/ul[240]/li[445]
9478 Couldn't pop: html, /!doctype[0]/html[2]/body[73]/div[88]/ul[240]/li[445]

That is often due to only one problem (typically missing a closing value like </li>) that cascades.

For tables that don't need captions, please add <!-- nocaption --> after the <table>. That means people don't have to check through the problems each time to see which are real and which are not.

Under errors you will find mismatches in the version section numbers, or missing double links. There will be a suggestion as to the fix, but look at the text to see if that is right first, since sometimes it is the level that is wrong, or some other problem! Example: the following might be misnumbered, or it might need to be an h4 instead of h2.
  • tr35-general.html <h2><a name="Pivots" href="#Pivots">11 Pivots</a></h2> <!-- Section numbers mismatch, was 10.1.1;  -->


Once those are addressed, then a clean table of contents is generated after "*REVISED TOC*", which you can use to replace the old ones.

Missing/Extra DTD items

At the very end, it lists a comparison to of the DTD items. There are two possible problems:

  1. There is an extra line in the spec. This is typically where the spec line needs to be fixed. Example:
    • beforeCurrency missing ldml <!ELEMENT beforeCurrency (alias|(currencyMatch*,surroundingMatch*,insertBetween*,special*))
    • beforeCurrency extra <!ELEMENT beforeCurrency (alias | (currencyMatch*, surroundingMatch*, insertBetween*)) >
  2. A line is simply missing. Example:
    • codePattern missing ldml <!ATTLIST codePattern type NMTOKEN #REQUIRED >
Both of these issues should be addressed.

  • Ideally, it would list missing/extra lines according to which spec they should be present in, but that isn't done yet
  • We probably want to skip the deprecated items; either that or have a notation in the spec that can be checked.